Поиск по каталогу продукции

combines everything you love about Trinket with the familiarity of the core Arduino chip, the ATmega328. It's like an Arduino Pro Mini with more pins and USB tossed in. Trinket's a year old now, and while its been great to see tons of tiny projects, sometimes you just need more pins, more FLASH, and more RAM. That's why we designed Pro Trinket, with 18 GPIO, 2 extra analog inputs, 28K of flash, and 2K of RAM. Like the Trinket, it has onboard USB bootloading support - we opted for a MicroUSB jack this time. We also added Optiboot support, so you can either program your Pro Trinket over USB or with a FTDI cable just like the Pro Mini and friends. The Pro Trinket PCB measures only 1.5' x 0.7' x 0.2' (without headers) but packs the same capability as an Arduino UNO. So it's great once you've finished up a prototype on an official Arduino UNO and want to make the project smaller. The Pro Trinket 3V uses the Atmega328P chip, which is the same core chip in the Arduino UNO/Duemilanove/Mini/etc. However, it uses 3V logic and 12MHz clock which means it's good when you want a lower-power and lower-voltage setup. Pro Trinket is programmable using the Arduino IDE as you already set up, and 95% of Arduino projects will work out of the box! Here's some things you may have to consider when adapting Arduino sketches: Pins #2 and #7 are not available (they are exclusively for USB)
The Pro Trinket 3V runs at 12MHz, this doesn't affect most projects. Only the most timing-specific libraries may be affected, check the documentation! The NeoPixel Library works fine at 12MHz.
The onboard power supply is a 3.3V regulator and it can provide 150mA output
You cannot plug shields directly into the Pro Trinket
There is no Serial-to-USB chip onboard. This is to keep the Pro Trinket small and inexpensive, you can use any FTDI cable to connect to the FTDI port for a Serial connection. The USB connection is for uploading new code only.
The bootloader on the Pro Trinket use 4KB of FLASH so the maximum sketch size is 28,672 bytes. The bootloader does not affect RAM usage.
Here's some handy specifications: ATmega328P onboad chip in QFN package running at 3.3V logic
12MHz clock rate, 28K FLASH available
USB bootloader with a nice LED indicator looks just like a USBtinyISP so you can program it with AVRdude and/or the Arduino IDE (with a few simple config modifications).
Also has headers for an FTDI port for reprogramming
Micro-USB jack for power and/or USB uploading, you can put it in a box or tape it up and use any USB cable for when you want to reprogram.
On-board 3.3V power regulator with 150mA output capability and ultra-low dropout. Up to 16V input, reverse-polarity protection, thermal and current-limit protection.
Power with either USB or external output (such as a battery) - it'll automatically switch over
On-board green power LED and red pin #13 LED
Reset button for entering the bootloader or restarting the program.
Works with 99% of existing Arduino sketches (anything that doesn't use more than 28K, and doesn't require pins #2 and #7) Dimensions:
- Size: 38mm x 18mm x 2mm
- Height with MicroUSB: 4mm / 0.16'
- Weight: 2.6g <<

упаковка: размер/кол-во 33.5*25*29/500 <<

to provide a convenient interface to attach 4D Systems display modules to the Arduino platform, without having to use jumper wires on the Arduino headers. Communication to the 4D Systems display modules is performed via the Arduino's serial port (RX and TX), and is provided to the user in a simple 5-pin interface, where a 5 way cable can be attached between the Shield and the display module. Power for the display is supplied from the Arduino_s 5V bus. No external power is required for the Display Module as all power is supplied from the Arduino, via the display adapter. Features: Direct Shield connection to the Arduino
Simple 5-pin serial interface for 4D System display modules
Arduino supplied 5V power for display module
5 wire ribbon included <<

Nano это уменьшенный аналог Arduino Uno, отличается формфактором платы, которая в 2-2.5 раза меньше , чем Arduino Uno , в отсутствии силового разъема постоянного тока и работе через кабель Mini-B USB. Описание Программируемый микроконтроллер на базе ATmega328P Чип ATmega328P Вес брутто 10.50 Транспортная упаковка: размер/кол-во 42*28*18.5/200 <<

Миниатюрная плата микроконтроллера а базе ATmega168 Чип ATmega168 Интерфейс 2 - 6 аналоговых входов Номинальный ток, мА вход/ выход - 40 Напряжение питания, В 5 (вар.2 - 3,3) Входное напряжение, В 512 (вар.2 - 3,3512) Частота тактовая - 16 (вар.2 - 8) МГц Память ОЗУ - 1 килобайт, EEPROM - 512 байт Ширина, мм 18 Глубина, мм 33* Вес брутто 6.30 Транспортная упаковка: размер/кол-во 42*28*23.5/200 <<

all development boards, why would you not want to keep your board safe and sound inside this clear plastic enclosure? These cases protect your Arduino Uno from things like rogue wires that might short it out while still allowing full access to the board! Simply snap the Uno into the bottom half of the enclosure, then snap the two sides together. As you may have noticed, these enclosures are actually transparent. The enclosures are perfect for letting you see your Arduino Uno and make any needed adjustments easily. The enclosure provides slots to access each header, USB port, power jack, the reset button, the AREF and ICSP connectors, as well as feet and vents to ensure the board gets proper cooling and slide-in wall mounting slots. All of the status LEDs on the Uno are visible through the case thanks to light pipes embedded in the design. This is a really durable case that will do a great job protecting your Arduino Uno! Dimensions: 7.8 x 6.1 x 2.1cm <<

модули (ARDUINO) Чип ATmega328P Описание Программируемый микроконтроллер на AVRmega328P Напряжение питания, В 5 Глубина, мм 69 Вес брутто 28.50 Транспортная упаковка: размер/кол-во 52*29*28/100 Частота тактовая - 16 МГц Интерфейс 14 цифровых входов/ выходов, 6 аналоговых входов Тип разъёма USB/ DC Память ОЗУ - 1 килобайт, EEPROM - 512 байт Ширина, мм 53 Номинальный ток, мА вход/ выход - 40 Входное напряжение, В 712 (рекомендуется) <<

ПОЛЬЗОВАТЕЛЯ. В КОМПЛЕКТЕ ПЛАТА ОБРАБОТКИ ДАННЫХ Arduino Uno НА БАЗЕ МИКРОКОНТРОЛЛЕРА, ИНТЕРФЕЙСНЫЙ МОДУЛЬ С РАЗЪЕМАМИ РАЗНЫХ ТИПОВ, МОДУЛЬ ВВОДА-ВЫВОДА - С ЖК И КНОПОЧНЫМИ ПЕРЕКЛЮЧАТЕЛЯМИ , ИНТЕРФЕЙСНЫЙ МОДУЛЬ ДЛЯ ПОДКЛЮЧЕНИЯ XBee The SainSmart Uno for Arduino:
It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller, simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega8U2 programmed as a USB-to-serial converter and has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU mode. The SainSmart LCD Keypad Shield for Arduino: It includes a 16x2 HD44780 White on Blue LCD module and a 5 push button keypad for menu selection and user interface programming. Fully assembled. On-line Arduino tutorial and example code. Compatible with Arduino Uno, Mega, Duemilanove. Uses digital pins 4 - 10, and analog pin 0. The SainSmart XBee board for Arduino: It mates directly with the Arduino USB board and allows to wireless communicate over a modified ZigBee protocol using the popular XBee module from Maxstream. The SainSmart Sensor Shield V4.0 for Arduino: allows you to connect to various modules like sensors, servos, relays, buttons, potentiometers. Package Content:
1 SainSmart Uno for Arduino
1 SainSmart LCD Keypad shield
1 SainSmart XBee Shield
1 SainSmart Sensor Shield V4.0 <<

Вес брутто 7.40 Транспортная упаковка: размер/кол-во 48*31.5*27/300 <<

2.1 Рабочая частота 2,42,48 ГГц Напряжение питания, В 3,36 (7 max) Глубина, мм 37,3 Вес брутто 7.85 Транспортная упаковка: размер/кол-во 42*28*18.5/1000 Скорость передачи данных 1200-1382400 бод Дальность связи (при прямой видимости) - 10, 30 (max) м Высота, мм 7 Ширина, мм 15,5 Вес, г 3,5 Потребляемый ток, мА 10, 45 (max) Выходное напряжение, В логической единицы - 3,3 <<

(трехосевой гироскоп + трехосевое ускорение) Чип BMI160 Особенности Диапазон действия гироскопа:125 250 500 1000 2000 / с, Диапазон ускорения: 24816 Напряжение питания, В 3...5 Размер установочного отверстия, мм шаг 2,54 мм Ширина, мм 13 Глубина, мм 18 Вес брутто 4.25 Транспортная упаковка: размер/кол-во 28.5*21*19/200 <<

кнопки ля Arduino Описание Модуль кнопочного тактового переключателя Вес брутто 7.05 Транспортная упаковка: размер/кол-во 57*46*46/200 <<

емкостный сенсорный переключатель Описание Емкостный сенсорный датчик Вес брутто 5.25 Транспортная упаковка: размер/кол-во 28.5*21*19/200 <<

(ARDUINO) Описание Преобразователь интерфейса USB - RS232 Глубина, мм 54 Вес брутто 8.70 Транспортная упаковка: размер/кол-во 42*28*23.5/500 Поддержка XP/WIN7,WIN8/ ANDRIOD/APPLE Тип модуля Преобразователь интерфейса USB - Serial Высота, мм 6 Ширина, мм 16 Вес, г 10 <<

Module into, and make use of the resources of Pi more flexibly. It is compatible with the Compute Module IO Board V3 from the Raspberry Pi Foundation, along with various common use components. Compute Module IO Board Plus Features Compatible with the Compute Module IO Board V3 from the Raspberry Pi Foundation Raspberry Pi GPIO header, for connecting sorts of Raspberry Pi HATs Arduino connectivity, also supports Arduino shields 1-WIRE interface, for connecting single-bus devices like DS18B20 4x keys, 4x LEDs, 1x Buzzer, for I/O testing Onboard USB HUB, allows connecting more USB devices IR receiver, IR remote control is available Onboard USB TO UART, for serial debugging Sensor interface 10-bit ADC, 38KSPS, 11-ch (6-ch for Arduino interface, 5-ch for sensors) 16-bit DAC, 2-ch Onboard RTC, one of the most common and useful functions <<

модули (ARDUINO) Чип LM2596 Описание понижающий регулируемый (4,5...28/ 0,8...20 В) Совместимость возможная замена LM2596S КПД, % до 96 Глубина, мм 22 Максимальный ток, А 3 Вес брутто 3.90 Транспортная упаковка: размер/кол-во 50*38*40/200 Частота 1 МГц Тип модуля Регулируемый 3A DC-DC понижающий преобразователь на LM2596 с 5-16V до 1,25-5V Высота, мм 14 Ширина, мм 17 Диапазон рабочих температур, C -40+85 Входное напряжение, В 4,528 Выходное напряжение, В 0,820 регулируемое (уровень пульсаций - не более 30 мВ) <<