Для хобби, творчества и дома

эластичный и стойкий к моющим средствам и щелочам. Один из лучших материалов для печати на 3D принтере. Пластик ABS не имеет запаха и не явлтся токсичным. Температура плавления 220-260C. АБС пластик для 3д принтера применяется в деталях робототехники, DIY разработках, в конструкции автомобилей, канцелярских изделиях, корпусах бытовой техники, мебели, сантехники, а также в производстве игрушк, сувениров, спортивного инвентаря, медицинского оборудования и проч.
Благодаря толщине ABХарактеристики:
- Цвет: Зеленый
- Материал: ABS
- Диаметр нити: 1,75 мм
- Метров в катушке: 396 - Чистый вес пластика:1 кг.
- Вес пластика c катушкой: 1,25 кг.
- Упаковка: катушка в вакуумном пакете
- Производство Китай. Общие свойс <<

эластичный и стойкий к моющим средствам и щелочам. Один из лучших материалов для печати на 3D принтере. Пластик ABS не имеет запаха и не являся токсичным. Температура плавления 220-260C. АБС пластик для 3д принтера применяется в деталях робототехники, DIY разработках, в конструкции автомобилей, канцелярских изделиях, корпусах бытовой техники, мебели, сантехники, а также в производстве игруше, сувениров, спортивного инвентаря, медицинского оборудования и проч.
Благодаря толщине ABSХарактеристики:
- Цвет: Желтый
- Материал: ABS
- Диаметр нити: 1,75 мм
- Метров в катушке: 396 - Чистый вес пластика:1 кг.
- Вес пластика c катушкой: 1,25 кг.
- Упаковка: катушка в вакуумном пакете
- Производство Китай. Общие свойств <<

Shield Описание Ethernet плата расширения W5100 Чип W5100 Комплектность Micro SD Вес брутто 46.00 Транспортная упаковка: размер/кол-во 42*28*18.5/50 <<

of mbed and Arduino. With Seeeduino Arch, you can use mbed C/C++ SDK, libraries and online development tools to rapidly build a prototype. Seeeduino Arch has standard Arduino appearance and Grove connectors. It_s convenient to extend Shield and Grove products to Seeeduino Arch. Features
mbed enabled
lots of published libraries, projects
easy to use C/C++ SDK
online development tools
Stardard Arduino Appearance, two Grove connectors
available with 3.3V compatible shields
a large number of grove modules
Drag-n-drop programming
NXP LPC11U24 MCU
Low power ARM Cortex-M0 Core
48MHz, 32KB Flash, 8KB RAM, 4KB EEPROM
USB Device, 2xSPI, UART, I2C <<

МОНТИРУЕМАЯ ПОД ШТУКАТУРКУ (МОГУТ УСТАНАВЛ. ВИЛКИ RJ12/11) <<

этому шилду можно подключить два щеточных электромотора постоянного тока или один 4-х проводной двухфазный шаговый двигатель. Особенности:
- ARDUINO сов <<

БЛОКИРОВКОЙ <<

L298N для мотора постоянного тока Описание Модуль драйвера двигателя DC 4-х канальный Чип L298N Вес брутто 89.00 Транспортная упаковка: размер/кол-во 48*31.5*22/50 <<

Работает с EXPRESS GSM 2 по радиоканалу. <<

КРЫШКОЙ C БЕЗРЕЗЬБОВЫМИ КОНТАКТНЫМИ ЗАЖИМАМИЭЛ.-МЕХ.ЧАСТЬ <<

КРЫШКОЙ C БЕЗРЕЗЬБОВЫМИ КОНТАКТНЫМИ ЗАЖИМАМИ ЭЛ.-МЕХ. ЧАСТЬ <<

maybe a hexapod walker, or maybe just a piece of art with a lot of moving parts. Or maybe you want to drive a lot of LEDs with precise PWM output. Then you realize that the Arduino has only a few PWM outputs, and maybe those outputs are conflicting with another shield! What now? You could give up OR you could just get our handy PWM and Servo driver shield. It's just like our popular PWM/Servo Breakout but now Arduino-ready and works with any Arduino that uses shields: Uno, Leo, Mega, ADK, its all good. When we saw this chip, we quickly realized what an excellent add-on this would be. Using only two I2C pins, control 16 free-running PWM outputs! You can even stack up 62 shields to control up to 992 PWM outputs (which we would really like to see since it would be glorious and like 4 feet tall) Because I2C is a shared bus you can also connect other I2C devices and sensors to the SCL/SDA pins as long as their addresses don't conflict (this shield has address 0x40)
There's an I2C-controlled PWM driver with a built in clock. That means that, unlike the TLC5940 family, you do not need to continuously send it signal tying up your microcontroller, its completely free running!
It is 5V compliant, which means you can control it from a 3.3V Arduino and still safely drive up to 6V outputs (this is good for when you want to control white or blue LEDs with 3.4+ forward voltages)
6 address select pins so you can stack up to 62 of these on a single i2c bus, a total of 992 outputs - that's a lot of servos or LEDs
Adjustable frequency PWM up to about 1.6 KHz
12-bit resolution for each output - for servos, that means about 4us resolution at 60Hz update rate
Configurable push-pull or open-drain output
We wrapped up this lovely chip into a shield with a couple nice extras
Terminal block for power input (or you can use the 0.1' breakouts on the side)
Reverse polarity protection on the terminal block input
Green and red power-good LEDs
3 pin connectors in groups of 4 so you can plug in 16 servos at once (Servo plugs are slightly wider than 0.1' so you can only stack 4 next to each other on 0.1' header
Stackable design. You'll need to pick up stacking headers and right angle 3x4 headers in order to stack on top of this shield without the servo connections getting in the way.
A spot to place a big capacitor on the V+ line (in case you need it)
220 ohm series resistors on all the output lines to protect them, and to make driving LEDs trivial
Solder jumpers for the 6 address select pins
A lot of extra space remaining? Let's turn it into a prototyping area. You get a 5x20 proto area for any extra wiring you'd like to add
This product comes with a fully tested and assembled shield as well as 4 pieces of 3x4 male straight header (for servo/LED plugs), a 2-pin terminal block (for power) and a stick of 0.1' header so you can plug into an Arduino. A little light soldering will be required to assemble and customize the board by attaching the desired headers but it is a 15 minute task that even a beginner can do. If you want to use right-angle 3x4 headers, we also carry a 4 pack in the shop. Servos and Arduino not included - but we do sell tons of different servos in the shop so pick up a few while you're here! Dimensions (no headers or terminal block) 2.1' x 2.7' x 0.1' (54mm x 70mm x 3mm) <<